Filter
Top Products
Omni 3350 Installation Guide
24
Caution: Before connecting any peripheral device, turn off
power to the terminal (the LED is off). Turn on power only after
you are finished connecting the peripheral device(s). For
complete information about peripheral installation and use,
refer to the user documentation supplied with those devices.
Note: RS232-type devices do not work with the “PIN Pad”
port; PIN Pad-type devices do not work with the “RS232” port.
If an optional peripheral device does not function correctly,
check the port connection.
Connect PIN Pad, Smart Card Reader, or Bar Code
Wand
Refer to Figure 16:
1. If necessary, insert the small modular plug on one end of
the PIN pad cable into the PIN pad’s modular jack.
For a bar code wand, insert the RJ45-type plug on the end
of the cable into the “PIN Pad” serial port on the back
panel.
2. If installing a PINpad 101, PINpad 201, or PINpad 1000,
position and insert the grommet to secure the cable
connection, as shown in Figure 16.
If a cable is not already connected to the smart card reader
or PINpad 501, insert the small modular plug on one end
of the interface cable into the optional device’s modular
jack.
External LAN RS232
PIN Pad PIN Pad
RS232 Electronic Cash Register RS232
Optional Device
Connection Port
O3350 IG 19496 Book.book Page 24 Wednesday, April 5, 2000 10:30 PM