Filter
Top Products
TERMINAL SETUP
Install the Paper Roll
V
X
5XX/V
X
6XX INSTALLATION GUIDE 17
Install the Paper
Roll
A fast, quiet thermal printer is built into the V
x
5xx/V
x
6xx terminal. Before you can
process transactions that require a receipt or record, you must install a roll of
thermal-sensitive paper in the printer.
The ITP uses a roll of single-ply, thermal-sensitive paper 57 millimeters (2.24
inches) wide and 25 meters (82 feet) long. A pink out-of-paper indicator line
appears on the edge of the paper approximately 18 inches before the end of the
roll. After this line appears, there is enough paper remaining on the roll to
conclude at least one transaction.
To Install a Paper Roll
1 Press down on the button located on the side of the terminal to unlatch the
paper roll cover, then lift the cover up and back (see Figure 7).
Figure 7 Opening the Printer Cover
2 Remove any partial roll of paper in the printer tray by lifting up (see Figure 8).
CAUTION
Poor-quality paper can jam the printer and create excessive paper dust. To order
high-quality VeriFone paper, refer to Accessories and Documentation.
Store thermal paper in a dry, dark area. Handle thermal paper carefully: impact,
friction, temperature, humidity, and oils affect the color and storage
characteristics of the paper.
Never load a roll of paper with folds, wrinkles, tears, or holes at the edges in the
print area.