Filter
Top Products
TERMINAL SETUP
Connect the Terminal Power Pack
V
X
5XX/V
X
6XX INSTALLATION GUIDE 25
Connect the
Terminal Power
Pack
When you have finished connecting optional peripheral(s), you are ready to
connect the V
x
5xx/V
x
6xx terminal to the provided power source.
To Connect the
Terminal Power Pack
1 Insert the round barrel connector (see Figure 18 and Figure 19) into
the power port, identified by the icon at right.
Figure 18 V
x
6xx Power Pack Connection
Figure 19 V
x
5xx Power Pack Connection
2 Route the cable through cable retainer to secure the power cord (see Figure
19).
3 Insert the AC power cord into the power pack.
CAUTION
Using an incorrectly rated power supply may damage the terminal or cause it not
to work as specified. Before troubleshooting, ensure that the power supply being
used to power the terminal matches the requirements specified on the bottom of
the terminal. (See Chapter 3, Specifications, for detailed power supply
specifications.) Obtain the appropriately rated power supply before
proceeding.
NOTE
The bottom of the V
x
5xx has an integrated cable-retaining feature to secure the
power cord to the terminal.