VeriFone Vx510 Credit Card Machine User Manual


 
TERMINAL SETUP
Install/Replace MSAM Cards
20 V
X
5XX/V
X
6XX INSTALLATION GUIDE
3 Remove the MSAM compartment door screw and rotate the door up and back
to access the MSAM cardholders (see Figure 11).
Figure 11 Opening MSAM Compartment Door
4 Remove any previously installed MSAM card by sliding the card from the
MSAM cardholder.
5 Install an MSAM card by aligning the card and carefully sliding it within the
guides on the cover until it is fully inserted (see Figure 12).
Figure 12 Installing an MSAM Card
MSAM COMPARTMENT
DOOR
MSAM COMPARTMENT
DOOR SCREW
NOTE
Before inserting the MSAM card, position it as shown in Figure 12, with the card’s
gold contacts facing the smart car reader end of the terminal. The cardholder
connector base has a set of contacts and a notch on one corner to ensure the
MSAM card is positioned correctly. The MSAM card has a notch on one corner to
ensure that it fits into the connector base in only one way. The MSAM
compartment door will not close properly if the MSAM cards are installed
incorrectly.