Verizon GT704WGB Network Router User Manual


 
Wireless Settings
4.5 WPS (WiFI Protected Setup)
4
42
© 2008 Verizon. All Rights Reserved.
Activate WPS by clicking the “On” radio button under “Turn WPS ON.”2.
Click 3. Apply at the bottom of the screen. The Router is now ready to accept
WPS clients on its wireless network.
4.5a Joining the WPS Wireless Network
To join the WPS wireless network, press the “Wi-Fi Protected Setup” button on
the front panel of the Router, then press the WPS button on the wireless client.
The Router and client will search and locate each other, then auto-configure
whatever wireless security (WPA, etc.) is being used. It can take up to 2 minutes
for the Router and client to finish the connection procedure. When the
connection proecedure has completed, the client will be on the secure wireless
network.
Alternatively, a client can join the Router’s WPS wireless network by entering the
Router’s WPS PIN number in the client’s wireless network setup GUI. The Router’s
WPS AP PIN number is displayed in the WiFi Protected Setup screen. If no PIN
appears, click Generate PIN to create one.