Verizon GT704WGB Network Router User Manual


 
Wireless DSL Gateway User Manual
10/16/08
53
© 2008 Verizon. All Rights Reserved.
Enable Public/Private IP Addressing. This feature is used in conjunction 4.
with Multiple Static IP Addresses. When selected, the Gateway uses NAT
for private IP addressing for the LAN, allowing both public and private IP
addressing to be configured to the LAN simultaneously, while the DHCP
server is reserved for private IP addressing. All computers using public IP
addresses must have the public IP addresses statically assigned.
Select the DNS type. If static DNS address was selected, enter the primary 5.
DNS address and, optionally, the secondary DNS address in the appropriate
text boxes.
Select 6. Dialout on-demand (optional). To have the Gateway automatically
connect to the Internet whenever needed (when a Web browser is opened,
for example), activate “Dialout on-demand” by clicking in the appropriate
check box. When Dialout on-demand is activated, the user can also set the
Gateway to disconnect from the Internet after a certain amount of idle
time (no Internet activity). To do this, enter the number of idle time minutes
(minimum 2 minutes) before disconnection occurs in the text box before
“Minutes.”
Adjust MTU settings (optional). Enter the maximum transmission unit (MTU) 7.
value (in bytes) in this text box. This value corresponds to the largest physical
packet size the network is allowed to transmit. Packets larger than this size
are divided into smaller packets. It is recommended to leave this value set at
the default (1492).
When finished in this screen, click Apply to activate any changes made.