54
Port Ranges
You can dene up to six port ranges for each application. Each port range has the following options:
• Start Port — Type the beginning of the range of port numbers used by outgoing trac
for this application. Use as many rows as necessary to dene the required number of port
ranges. Unused rows can be left blank.
• End Port — Type the end of the range of port numbers. If the port is a single port instead of a
range, type the same value for both the Start Port and the End Port.
• Protocol — For each port range (each row), select the protocol (TCP, UDP, or both) used by
that port range.
You can dene all of your applications before you click Save to save your changes.
Use the Ports and Hide links to open and close the Port Denition Panel so you can dene the ports
for each application as needed.
Buttons
• Save — Click this button to save changes made to the applications and/or port ranges.
• Cancel — Click this button to discard changes made to the applications and/or port ranges.