Filter
Top Products
Installation
Vidikron Vision 30 Series Owner’s Operating Manual 31
PRE
L
IMINAR
Y
The anamorphic lens will almost always be angled with respect to the projector; this is
normal.
Once the proper lens angle has been set, firmly tighten the bottom two Pitch/Y-Adjustment
Screws to secure the lens in place.
There may be some pincushion distortion even after the lens is properly
adjusted, especially at shorter throw distances. If this is the case, Vidikron
recommends that you slightly over-scan the image into the screen frame
area to mask the distortion.
Correct Lens Angle
Incorrect Lens Angle
Note