Filter
Top Products
45
SETTING | Signal (Video)
“Signal” is only supported when the source is Video or S-video.
White Level
Allow user adjust White Level when inputting S-Video or Video signals.
Black Level
Allow user adjust Black Level when inputting S-Video or Video signals.
Saturation
Adjust a video image from black and white to fully saturated color.
`
Press the ◄ to decrease the amount of saturation in the image.
`
Press the ► to increase the amount of saturation in the image.
IRE
Adjust measurement of composite video signals.
“IRE” is only supported on NTSC signal.
Projector ID
ID denition can be set up by menu (range 0-99) to indicate an individual projector.