Filter
Top Products
vi
Please follow all warnings, precautions and maintenance as
recommended in this user’s guide.
▀■ Warning-
Do not look into the projector’s lens when the lamp is on. The
bright light may hurt your eyes.
▀■ Warning-
To reduce the risk of re or electric shock, do not expose this
projector to rain or moisture.
▀■ Warning-
Please do not open or disassemble the projector as this may
cause electric shock.
▀■ Warning-
When replacing the lamp, please allow the unit to cool down.
Follow instructions as described on pages 65-66.
▀■ Warning-
This projector will detect the life of the lamp itself. Please be
sure to change the lamp when it shows warning messages.
▀■ Warning-
Reset the “Lamp Reset” function from the on-screen display
“OPTIONS | Lamp Settings” menu after replacing the lamp
module (refer to page 56).
▀■ Warning-
When switching the projector off, please ensure the cooling
cycle has been completed before disconnecting power. Allow
60 seconds for the projector to cool down.
▀■ Warning-
Do not use lens cap when projector is in operation.
▀■ Warning-
When the lamp is approaching the end of its lifetime, the
message “Lamp Warning: Lamp life exceeded.” will show
on the screen. Please contact your local reseller or service
center to change the lamp as soon as possible.
▀■ Warning-
Do not look into or point the laser pointer on your remote
control into your or someone’s eyes. Laser pointer can cause
permanent damage to eyesight.
▀■ Warning-
Do not transport the projector with any lens installed.
Precautions