Filter
Top Products
70
Remote Key Code
Default custom code => 83F4
Mode 01 ~ 99 => 8301 ~ 8399
Format => NEC
Key Byte3 Byte4 Key Byte3 Byte4
Sync(Auto Sync) 08 f7 Pattern 55 AA
Keystone 09 F6 My Button 56 A9
Up 0b f4 HDMI 58 A7
Down 0c f3 DVI 5A A5
Left 0e f1 BNC 5B A4
Right 0f f0 Focus 92 6D
Mode(Color Mode) 10 ef Zoom 93 6C
Aspect 13 EC Shift(Lens Shift) 94 6B
Mute 14 eb Memory(Lens Shift Memory) 95 6A
Enter 15 ea RC ID 96 69
Standby (Power Off) 16 E9 i (INFO) 97 68
Power On 17 E8 Reset (Default) 98 67
Exit 28 D7 RGB Gain(Color setting) 99 66
Menu 30 CF Lamp PW (Lamp power) 9A 65
Source 40 bf PIP 9B 64
VGA (PC) 41 be Blend(Image blending) 9C 63
Video 52 ad GEO (Geometry) 9D 62
S-Video 53 AC Blank 07 f8
Remote operation
1. Under below conditions, the remote will enter “sleep mode” after 60 seconds.
a. No button pressed
b. Multi-keys pressed simultaneously
c. One key pressed continuously over 60 seconds
2. Remote ID switching
Press “RC ID” key for 3 seconds to enter switching mode, the LED will ash
slowly.
a. Default ID, press “0” + “0”, ID will reset to default custom code (83F4), and this
is a common code.
b. Other ID, such as “01”, press “0” + “1”; ID range 00 ~ 99
y If LED ash 3 times quickly, this means switching setup successfully;
y No any setting within 10 seconds, remote will exit the switching mode and
keep the original ID.