ViewSonic PJ510 10
Connecting Power Supply
1 Connect the connector of the power cord to the AC inlet of the projector.
2 Firmly plug the power cord’s plug into the outlet.
WARNING
• Please use extra caution when connecting the power cord as incorrect or faulty connections may
result in FIRE and/or ELECTRICAL SHOCK. Please adhere to the “PJ510 UG – Safety Guide”
and the following.
• Only plug the power cord into outlets rated for use with the power cord’s specified voltage
range.
• Only use the power cord that came with the projector. If it is damaged, contact your dealer to
newly get correct one.
• Never modify the power cord. Never attempt to defeat the ground connection of the three-
pronged plug.
• Make sure that you firmly connect the power cord to the projector and wall outlet.
AC Inlet
Connector Side
Power cord