Filter
Top Products
33 ViewSonic PJ510
Replacing The Air Filter
If the soiling will not come off the air filter, or it becomes damaged, then it needs to be replaced.
Please replace the air filter as soon as possible.
1 Turn off the projector, and unplug the power cord.
2 Contact your local dealer to prepare a new air filter. Tell the
dealer your air filter type number.
3 After making sure that the projector has cooled adequately,
remove the filter cover. Hold the release buttons of the filter
cover, while pulling it up.
4 Hold the release buttons of the air filter, while pulling down on
it.
5 Insert a new air filter, and replace the filter cover.
6 Reset the filter timer, according to following “Reset The Filter Timer”.
(1) Turn on the projector. While the projector running, press the MENU button to open the menu.
(2) Choose the “OPTION”.
(3) Choose the “FILTER TIME” using the (S)/(T) button, then press and hold the (X) button of
projector or the RESET button of remote control for 3 seconds.
(4) Choose the “RESET” using the (S) button.
Filter cover
Release buttons
Release buttons
Air filter