Filter
Top Products
EASY Menu
EASY Menu
Item Description
ASPECT
Using the buttons ◄/► switches the mode for aspect ratio.
See the ASPECT item in the IMAGE menu
.
AUTO KEY
-
STONE EXE
-
CUTE
Using the button ► executes the auto keystone function.
See the AUTO KEYSTONE EXECUTE item in the SETUP menu
.
This function will be unavailable when Transition Detector is on.
KEYSTONE
Using the buttons ◄/► corrects the keystone distortion.
See the item KEYSTONE of section SETUP menu
.
This function will be unavailable when Transition Detector is on.
PICTURE MODE
Using the buttons ◄/► switches the mode of picture type. The
modes of picture type are combinations of a mode of GAMMA and
a mode of COLOR TEMP
. Choose a suitable mode according to the
projected source.
NORMAL
CINEMA
DYNAMIC
WHITEBOARD
BOARD(GREEN)
BOARD(BLACK)
NORMAL:
(COLOR TEMP = MID DEFAULT) + (GAMMA = #1 DEFAULT)
CINEMA:
(COLOR TEMP = LOW DEFAULT) + (GAMMA = #2 DEFAULT)
DYNAMIC:
(COLOR TEMP = HIGH DEFAULT) + (GAMMA = #3 DE-
FAULT)
BOARD(BLACK): (COLOR TEMP = Hi-BRIGHT-1 DEFAULT) +
(GAMMA = #4 DEFAULT)
BOARD(GREEN): (COLOR TEMP = Hi-BRIGHT-2 DEFAULT) +
(GAMMA = #4 DEFAULT)
WHITEBOARD: (COLOR TEMP = MID DEFAULT) + (GAMMA = #5
DEFAULT)
• When the combination of GAMMA and COLOR TEMP differs
from pre-assigned modes above, the display on the menu for the
PICTURE MODE is “CUSTOM”. Please refer to the GAMMA
and
COLOR TEMP
items in the PICTURE menu.
•
When this function is performed, a certain extra such as a line may appear.
BRIGHTNESS
Using the buttons ◄/► adjusts the brightness.
See the item BRIGHTNESS in the PICTURE menu.
With the EASY MENU, items shown in the table below can
be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control. Then perform it referring to the
following table.
25ViewSonic PJ658