Filter
Top Products
Item Description
AUTO OFF
Using the buttons ▲/▼ adjusts the time to count down to automati-
cally turn the projector off.
Long (max. 99 minutes)
Short (min. 0 minute = DISABLE)
AUTO OFF
ENABL
E
1
AUTO OFF
DISABLE
0
When the time is set to 0, the projector is not turned off automati-
cally.
When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector
lamp will be turned off.
If one of the projector’s buttons or the remote control buttons is
pressed or one of the commands (except get commands) is trans-
mitted from the control port during the corresponding time, projector
will not be turned off.
Please refer to the section “Turning off the power”.
LAMP TIME
The lamp time is the time counted after the last resetting. It is
shown in the OPTION menu as the usage time of the lamp.
Pressing the RESET button on the remote control or the button ►
of the projector displays a dialog. To reset the lamp time, select the
RESET using the button ▲.
RESET
CANCEL
• Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.
• For the lamp replacement, see the section “Lamp”.
FILTER TIME
The filter time is the time counted after the last resetting. It is shown
in the OPTION menu as the usage time of the air filter.
Pressing the RESET button on the remote control or the button ► of the
projector displays a dialog. To reset the filter time, select the RESET using
the button ▲.
RESET
CANCEL
•
Please reset the filter time only when you have cleaned or replaced
the air filter, for a suitable indication about the air filter.
• For the air filter cleaning, see the section “Air filter”.
MY BUTTON
Sets the assigned function for the MY BUTTON1 and 2 buttons on
the included remote control.
• RGB1: Sets port to RGB1.
• RGB2: Sets port to RGB2.
• COMPONENT: Sets port to COMPONENT.
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
• INFORMATION: Displays INPUT INFORMATION
.
• AUTO KEYSTONE EXECUTE: Performs automatic KEYSTONE
correction.
• MY MEMORY: Loads MY MEMORY settings
.
• PICTURE MODE: Changes the PICTURE mode.
• FILTER RESET: Displays the filter time reset confirmation dia
-
logue.
OPTION Menu
OPTION Menu (continued)
41ViewSonic PJ658