Filter
Top Products
Item Description
SECURITY
1.3 If you have forgotten your PASSWORD
1.3-1 Follow the procedure in 1.1-1 to display the
ENTER PASSWORD BOX.
1.3-2 While the ENTER PASSWORD BOX is dis-
played, press and hold the RESET button on
the remote control for about 3 seconds.
The 10 digit Inquiring Code will be displayed.
NOTE: If there is no key input for about 55 seconds
while the Inquiring Code is displayed the menu will
close. If necessary repeat the process from 1.3-1.
1.3-3 Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD
will be sent after your user registration information is confirmed.
2. Using the MyScreen PASSWORD Function
The MyScreen PASSWORD function can be used to prohibit access to the
MyScreen function and prevent the currently registered MyScreen image
from being overwritten.
2.1 Turning on the MyScreen
PASSWORD
Function
2.1-1 Use the ▲/▼ buttons on the SECURITY
menu to select MyScreen PASSWORD and
press the ► button to display the MyScreen
PASSWORD on/off menu.
2.2 Setting the PASSWORD
2.2-1 Display the MyScreen on/off menu using the
procedure in 2.1-1.
2.2-2 Use the ▲/▼ buttons on the MyScreen PASS-
WORD on/off menu to select TURN ON.
The ENTER PASSWORD BOX (small) will be dis-
played.
2.2-3 Use the ▲/▼/◄/► buttons to enter the PASS-
WORD. Move the cursor to the right side of
the ENTER PASSWORD BOX (small) and
press the ► button to display the CHECK
PASSWORD BOX, enter the same PASS-
WORD again.
OPTION Menu (continued)
OPTION Menu
Inquiring Code
(PASSWORD)
CHECK PASSWORD
BOX
MyScreen PASSWORD
on/off menu
ENTER PASSWORD
BOX (small)
45ViewSonic PJ658