Filter
Top Products
Item Description
SECURITY
This projector is equipped with security functions.
User registration is required before using the security functions.
Please contact your local dealer.
1. Using Security Features
1.1 Inputting the PASSWORD
1.1-1 Use the ▲/▼ buttons on the OPTION menu
to select SECURITY and press the ► but-
ton. The ENTER PASSWORD box will be
displayed. The factory default PASSWORD is
5847. This PASSWORD can be changed (1.2
Changing the PASSWORD).
NOTE : It is strongly recommended the factory
default PASSWORD to be changed as
soon as possible.
1.1-2 Use the ▲/▼/◄/► buttons to enter the
registered PASSWORD. Move the cursor to
the right side of the ENTER PASSWORD
BOX and press the ► button to display the
SECURITY menu. If an incorrect PASSWORD
is input the ENTER PASSWORD BOX will be
displayed again. If incorrect PASSWORD is
input 3 times the projector will turn off. After-
wards the projector will turn off every time an
incorrect PASSWORD is input.
1.2 Changing the PASSWORD
1.2-1 Use the ▲/▼ buttons on the SECURITY menu
to select SECURITY PASSWORD CHANGE
and press the ► button to display the ENTER
NEW PASSWORD BOX.
1.2-2 Use the ▲/▼/◄/► buttons to enter the new
PASSWORD.
1.2-3 Move the cursor to the right side of the EN-
TER NEW PASSWORD BOX and press the
► button to display the NEW PASSWORD
AGAIN BOX, enter the same PASSWORD
again.
1.2-4 Move the cursor to the right side of the NEW
PASSWORD AGAIN BOX and press the ►
button and the NOTE NEW PASSWORD BOX
will be displayed for about 20 seconds, please
make note of the PASSWORD during this
time. Pressing the ENTER button on the re-
mote controll or INPUT button on the projector
will close the NOTE NEW PASSWORD BOX.
NOTE : Please do not forget your PASSWORD.
OPTION Menu (continued)
OPTION Menu
ENTER PASSWORD
BOX
SECURITY MENU
ENTER NEW PASSWORD
BOX
NEW PASSWORD
AGAIN BOX
NOTE NEW PASS-
WORD BOX
44ViewSonic PJ658