Filter
Top Products
24 VISIONEER ONETOUCH 5300 SCANNER INSTALLATION GUIDE
ADJUSTING SCAN SETTINGS AND PAGE SETTINGS
If you’re scanning using a scan configuration that you define yourself,
you can adjust that configuration’s scan settings and page settings. For
example, if the scanned image is too dark, you can adjust the brightness
of the scan setting.
To adjust the scan settings and page settings:
1. Press and hold down a button on the scanner.
The Preferences dialog box appears.
The selected tab on the dialog box corresponds to the button you
pressed. You can click the other tabs for the other buttons.
2. In the Configuration to Use list, click the configuration that you
want to adjust.
For example, the following figure shows a configuration named
Special Scan for Dark Print (which you would have created earlier).
Note: You can only adjust the settings for scan configurations that
you define yourself. You cannot change the scan settings or page
settings for any of the pre-defined scan configurations.