Filter
Top Products
8 VISIONEER ONETOUCH 5300 SCANNER INSTALLATION GUIDE
INSTALLING THE 5300 PARALLEL SCANNER
This section of the manual contains instructions for the Visioneer
OneTouch 5300 Parallel scanner.
WHAT YOU NEED
To use the 5300 Parallel scanner and software, you need the
following:
• IBM PC (or 100-percent compatible) Pentium or higher
• Microsoft Windows 95, Windows 98, or Microsoft NT 4.0
• One available parallel (LPT) port on your computer
• 16 megabytes (MB) or more of available internal memory (RAM)
• 35 MB of free hard disk space
• A VGA or SVGA monitor. Recommended monitor setting for color
is as many colors as possible—High Color (16-bit), True Color
(24-bit), or 32-bit if your monitor has that capability. Set resolution
to at least 800 by 600 pixels. To set colors and resolution, open the
Windows Control Panel, double-click Display, and click Settings.
• A CD-ROM drive
GETTING THE PAPERPORT SOFTWARE USER’S GUIDE
The CD also includes your PaperPort User’s Guide. This guide provides
more detailed information about the PaperPort software’s features.
Please see the CD to view or print the guide. The guide is also available
at Visioneer’s web site at www.visioneer.com.