Filter
Top Products
STEP 3: CHECKING OUT YOUR SCANNER
9
To connect the scanner:
1. After checking for all the above problems, right-click the scanner
icon with the red X over it.
The shortcut menu appears.
2. Choose Connect from the shortcut menu.
The software finds the scanner and makes the connection. The
scanner icon will no longer have a red X through it, and you’re
ready to begin scanning.
If you try all the troubleshooting procedures described above and in the
Readme file, and the scanner icon still has a red X through it, you may
have a malfunctioning scanner. Please see “Contacting Visioneer for
Technical Support” on page 36 for technical assistance telephone
numbers. Also visit our web site at www.visioneer.com for additional
technical information.