Filter
Top Products
DLP Projector – User’s Manual
Starting and Shutting down the Projector
1.
Remove the lens cap.
2.
Securely connect the power cord
and signal cable. When connected,
the power led will turn red.
3.
Turn on the lamp by pressing
“
” button on the rear of the
projector or “
” on the remote
control.
The PWR LED will now flash
red
The startup screen will display in
approximately 30 seconds. The first
time you use the projector, you can
select your preferred language from
quick menu after the startup screen
display.
– 13 –