Filter
Top Products
DLP Projector—User’s Manual
— 58 —
APPENDIX I
RS-232C Protocol
RS232 Setting
Baud rate:
115200
Parity check: None
Data bit: 8
Stop bit: 1
Flow Control None
RS-232 Setup for D5180 / D5185
In the main HyperTerminal window,
1. Select “Property” from the “File” Menu
2.
Select “Setting” Tab
3. Select “VT100” under Emulation
4. Click on “ASCII Setup”
5.
Tick the options as below
6.
Click OK while done
Control Command Structure
Header code Command code Data code End code
HEX Command Data 0Dh
ASCII ‘V’ Command Data CR