Filter
Top Products
DLP Projector—User’s Manual
— 20 —
ON-SCREEN DISPLAY (OSD) MENU SETTINGS
OSD Menu Controls
The projector has an OSD that lets you make image adjustments and change various settings.
Navigating the OSD
You can use the remote control cursor buttons or the buttons on the top of the projector to navigate
and make changes to the OSD. The following illustration shows the corresponding buttons on the
projector.
13
1
6
5
2
7
2
4
1
1
3
4
5
6
7
1. To enter the OSD, press the MENU but-
ton.
2. There are seven menus. Press the cur-
sor ▲▼ button to move through the
menus.
3. Select one of the main menu, Press
ENTER or ► button into submenu.
Press the cursor ▲▼ button to move up
and down in submenu.
4. Select one of the submenu, Press
ENTER or ► button into the selected
item. Press ▲▼or ◄► to change val-
ues for settings.
5. Press MENU to close the OSD or leave
a submenu.
Note:
Depending on the video source, not all items in the OSD are available. For example, the Horizon-
tal/Vertical Position items in the Computer menu can only be modified when connected to a PC.
Items that are not available cannot be accessed and are grayed out.