Filter
Top Products
H
IGH SHELF FILTER
• Gain: Range –24dB to +12dB; Default: 0
• Frequency Range: 1000Hz to 21000Hz; Default: 5005 Hz
• Q: Range: 0.71 to 1.41; Default: 1
O
UTPUT GAIN: 0dB to –50dB; Default: 0dB
The Output Gain controls the overall output level of the IR-1.
ER BUILDUP: Range: 0 to 150ms; Default: 0ms
The Early Reflections Buildup allows control of the buildup slope of the early reflections.
It determines a transient (abrupt) or smooth attack for the early reflections. The control
is effective only when the Direct control is set to Off.
ER/TR-X
CROSSOVER: Range ±100ms; Default: 0ms
This control allows you to modify the time reference point that splits the Tail Reflections
(TR) from the Early Reflections (ER).
When using the IR library, this control will get its nominal value from the IR properties.
When importing a user IR, the IR-series will attempt to define the crossover point
automatically.
When you load an IR, the plug-in attempts to locate the Direct signal, Early Reflections
(ER), and Tail Reflections (TR) automatically, so that they can be manipulated
separately.
Waves IR-1 software guide page 31 of 40