Filter
Top Products
Waves IR-1 software guide page 38 of 40
• For Reverb controls having a ratio scale of 0.25 to 4 (Reverb Time, Density,
Resonance, Size) the flat point is 1.
• For Reverb controls having a percentage scale of 0% to 100% (Decorrelation,
Crosstalk, Dry/Wet), the flat point is 0%.
• Predelay reverb controls (Direct Predelay, ER Predelay, Tail Predelay, ER/TR-X,
Dry latency) have a flat point of 0.
• Flat point for Direct/ER/Tail gains and switches is 0dB with all switches “On”.
• For Full-CPU/Low-CPU, the flat point is Full-CPU.
• In the Gain-Envelope graph, the flat point is obtained by using the Gain
Envelope
• Bypass control or by using the Gain Envelope Clear control.
• In the Damping Filters section, set the ratios to 1 for the flat point.
• In the EQ filters section, the flat point is obtained by setting all bands to Off, or
by setting all the gains to 0dB.
• You can set the flat point of any control by option-clicking (Mac) or alt-clicking
(PC) on that control. The only exception is the Wet/Dry control. Opt or alt-clicking
the Wet/Dry control sets it to 100% (but the flat point is 0%).
S
YSTEM REQUIREMENTS
Minimal system requirements for running at least 1 instance of the Full Stereo in real
time at 48kHz:
Native:
MAC G4 867, 512Mb RAM.
PC Intel - P4, Celeron 1.4 Gig and P3-700, or AMD Athlon XP, 512Mb RAM.
NOTES CPU ABOUT OPTIMIZATION