Filter
Top Products
15
Step
4 Add Computers to the Network
Choose a computer and connection type
After your first computer is connected to the Intelligent Gateway and your Internet connection has been
established, it is time to connect the other computers to the network.
Use any or all of the following methods to connect additional computers to your network:
* You must use a 2Wire Wireless PC Card to convert your Intelligent Gateway into a wireless broadband
router. Other wireless cards are not supported.
Connection Type Go to...
Ethernet
Requires a computer with an Ethernet port.
Recommended for small office environments using Ethernet (Category 5)
wiring.
page 16
USB
Requires a computer with an available USB port. See the USB connection
option for exceptions.
page 17
Home phoneline networking (HomePNA)
Requires a computer with a HomePNA port or an external HomePNA adapter
such as the PC Port.
page 18
Wireless
Requires a computer with a Wi-Fi compliant (802.11b) wireless network adapter
installed and a 2Wire Wireless PC Card* installed in the Intelligent Gateway.
Wireless adapters are purchased separately from the Intelligent Gateway.
Recommended for mobile computers such as laptops.
page 20