Filter
Top Products
17
Note: Only one Windows or Macintosh computer can be directly connected to the Intelligent Gateway
using the USB connection. Intelligent Gateway USB connectivity is NOT available for Macintosh OS
earlier than 8.6, Mac OS 10.0, Mac OS 10.1, Windows 95, Window 95 OSR2, or Windows NT. Additional
computers may be added to the network using connection options such as Ethernet.
1. Connect the USB cable from the PC port on the Intelligent Gateway to the USB port on your computer.
Before installing your Intelligent Gateway software on this computer, you must install a USB driver.
Detailed instructions for installing USB drivers begins on page 8.
Repeat Step 3 “Install the Intelligent Gateway Software” on page 12.
USB Connection
Requires a computer with an available USB port. Refer to the note below for
exceptions.