Filter
Top Products
Getting Started 17
When to Replace the Battery
Over time, the battery's capacity gradually decreases. We recommend that you replace
your battery when you notice that it begins to store significantly less charge.
Changing the Battery
Change the main battery pack as follows:
1. Turn off the thin computer and disconnect the power adapter from the electrical outlet.
2. Close the display cover and turn the thin computer over.
3. Slide the battery lock (3) to unlock.
4. Slide and hold the battery release latch (1) away from the battery (2) as you gently pull
the battery out of the battery compartment.
5. Slide and hold the battery release latch (1) and then insert the new battery into the
battery compartment. Make sure the replacement battery is properly orientated. Check
that the battery lock (3) locks back into position.
Figure 3-7 Battery Latches
Power Saving Modes
Adjust the default power management settings in the Advanced tab of the Power Options
Properties dialog box (click Start | Settings | Control Panel | Power Options |
Advanced). The Power Options Properties dialog box allows you to set different actions
to take when the thin computer is left idle for a certain amount of time.