Filter
Top Products
26
3. Take the cables equipped with battery clips on one end
(Figure 6) and place the ring terminals over the two cabling
terminals on the back of the inverter. (The cabling terminals
are shown in Figure 4.))
Caution! Reverse Polarity
Power connections of the 12 volts DC battery to the
XPower must be positive to positive and negative to
negative.
A reverse polarity connection (positive to negative)
will blow a fuse in the inverter and may permanently
damage the unit. Damage caused by a reverse
polarity connection is not covered by your warranty.
Caution!
Make sure you connect red to red and black to black,
and make sure you screw the nuts on tightly.