Filter
Top Products
2
Phaser 3400 Personal Laser Printer
Control Panel
1. Error light
■ Blinking = Insufficient memory
■ Blinking alternating with the Paper
light blinking = Output tray is full.
■ 2 fast blinks, then off, then 2 fast
blinks, then off, etc. = Toner is
getting low. Replace the laser print
cartridge soon.
■ On = Cover open, cartridge not
installed or not seated properly
■ On with Paper light = Paper jam
2. Manual-feed
light
■ On with Data light = Ready for a
manual-feed job. Load paper in the
multi-purpose tray and press the
Print button to start the job.
3. Paper light
■ On = Out of paper
■ On with Error light = Paper jam
■ Blinking alternating with the Error
light blinking = Output tray is full.
4. Data light
■ On = Ready to receive data
■ On with Manual-feed light = Ready
for a manual-feed job
■ Slow blink = Receiving data
■ Fast blink = Printing
5. Cancel button
■ To cancel a print job, hold down the
Cancel button until all lights blink,
then release the button.
6. Print button
■ When the Manual-feed light is on
and paper is loaded in the
multi-purpose tray, press the Print
button to feed the paper into the
printer.
■ To print a Configuration Sheet, hold
the Print button until all lights blink,
then release the button.
If all lights are blinking, this indicates a system error. Turn the power off and
then back on to clear. If the problem persists, contact Xerox Customer Support.
1
2
3
4
5
6