Filter
Top Products
FUNCTION SELECTION VIA LINE (FSL) COMMANDS
Y12—Set Default Paper Size
@Y12, n1 [,n2]@
Selects paper size. As with FSL Y11, a PCL5 command selects
the proper paper size. The table lists the supported paper sizes
and illustrates how they map to PCL5 for the MRP family of
printers. Also, the table identifies whether the AS/400 Utility
provides access to the paper size or whether the user-created
FSL must be used.
Utility FSL parameter
PCL
parameter
to Esc&I#A
4215/MRP and
4219/MRP
4220/MRP
4230/MRP
Yes 1 A4 26 A4 Tray, Manual Tray 1-5
Yes 2 Legal 3 Legal Tray, Manual Tray 1-5
Yes 3 Letter 2 Letter Tray, Manual Tray 1-5
Yes 4 Executive 1 Manual Tray 1-3, 5
Yes 5 Monarch Envelope 80 Manual Tray 5
Yes 6 Business 10 Envelope 81 Manual Tray 5
Yes 7 DL Envelope 90 Manual Tray 5
Yes 8 C5 Envelope 91 Manual Tray 5
Yes 10 A3 27 A3 Tray, Manual Tray 1-3, 5
Yes 11 Ledger 6 Ledger Tray, Manual Tray 1-3, 5
N/A 16 B5 Envelope 100 Not Supported Not Supported
Example @Y12, 2@ sets the page size to legal.
Remember The setting for Y12 is not necessary. It is overwritten if Y119 is
enabled. The Automatic Papersize Configuration logic enabled
by Y119 overwrites any setting you provide to Y12.
Remember On the 4215/MRP and 4219/MRP, the size of the manual feed is
set to the default paper size. When the manual feed tray is used
for other sizes:
1. Disable Y119
2. Use the Y12 command to define the paper size for the
manual feed tray.
Remember If paper trays are not installed in the 4215/MRP or 4219/MRP, the
sizes defined for the missing trays are either letter or A4.
Remember For firmware release S11 116.010 and beyond, the values for Y12
(paper size) will be computed automatically for the user. You no
longer need to include a Y12 command to inform the interface
of the size of paper that is loaded in a tray. Previous versions of
the interface card would format data according to the paper size
3-22 XEROX MRP FAMILY COAX COMMAND REFERENCE