Filter
Top Products
FUNCTION SELECTION VIA LINE (FSL) COMMANDS
Y30—Non-SCS, Valid FF Followed by Data
@Y30, n@
Implements an IBM RPQ and takes effect as soon as the
command is received. This function determines the first print
position after the Form Feed (FF) command has been executed.
n Values for n are:
0* Next print position is the 2nd Print
Position (PP) on the next form, when a
valid FF, which is not positioned at the
end of the IBM print buffer, is received.
1* Next character position is the 1st Print
Position on the next form, when a valid
FF, which is not positioned at the end of
the IBM print buffer, is received.
The default is product dependent. PCL platform has a default of
1. If n = 0 is selected, the printer is set to print at position 2 of
the first print line of the next page. If n = 1 is selected, the
printer is set to print at position 1 of the first print line of the
next page.
This option only affects DSC LU3 mode, a NON SCS printing,
and corresponds with the IBM 3268 RPQ SC9503 and the IBM
3287 RPQ N/A.
Example @Y30, 1@ sets the printer to advance to 1st Print Position (PP)
on the next form.
o Form feed
here
ON OFF
Print position
1 2 3
Page boundary
Next form
Present form
Same print line
Next print line
Next print line
Last print line
MPP+1
XEROX MRP FAMILY COAX COMMAND REFERENCE 3-31