Filter
Top Products
FUNCTION SELECTION VIA LINE (FSL) COMMANDS
Y31—Non-SCS, Valid FF at End of Print Buffer
@Y31, n@
Implements an IBM RPQ and takes effect as soon as the
command is received. This function determines the print line
position when a Form Feed command is the last command in the
print buffer, or is immediately followed by an end of message
code.
n Values for n are:
0* Next character position is the 1st Print
Position (PP) on the 2nd line on the next
form, when a valid FF positioned at the
end of the IBM print buffer, is received.
1* Next character position is the 1st Print
Position on the next form, when a valid
FF, which is not positioned at the end of
the IBM print buffer, is received.
The default is product dependent. PCL platform has a default of
1. If n = 0, (default) is selected, it automatically adds a new line
to a Form Feed command at the end of the print data. The
printer is set to print at position 1 of the second line of the next
page. If n = 1 is selected, it executes only a Form Feed
command. The printer is set to print at position 1 of the first
print line of the next form. This option is ignored if Automatic
Form Feed at End of Buffer (Y33) is ENABLED or Form Feed After
Local Copy (Y26) is ENABLED.
This option corresponds with the IBM 3268 RPQ SC9504 and the
IBM 3287 RPQ SC3749.
Example @Y31, 1@ sets the printer to advance to 1st PP and 1st line on
the next form.
o Form feed
code here
ON
OFF
Print position
1 2 3
Page boundary
Next form
Present form
Same print line
Next print line
Next print line
Last print line
MPP+1
3-32 XEROX MRP FAMILY COAX COMMAND REFERENCE