Filter
Top Products
10 Paper and other Media
Xerox WorkCentre 4250/4260 User Guide 157
the settings. If the settings are correct, select the Confirm button. Please refer
to Setting the Paper Size in the Paper and other Media chapter on page 160.
Using the Bypass Tray
The bypass tray is located on the right side of your machine. It can be closed when
not in use, making the product more compact. Use the bypass tray to print
transparencies, labels, envelopes or postcards in addition to making quick runs of
paper types or sizes that are not currently loaded in the paper tray. Acceptable
print media is plain paper from 3.9" x 5.8" to 8.5" x 14" (98 mm x 148 mm to 216
mm x 356 mm) and weighing between 16 lb and 43 lb (60 g/m²
and 163 g/m²).
Loading the Bypass Tray
1. Lower the bypass tray, located on the right side of the product and unfold the
paper support extension.
Remove any curl on
postcards and labels
before loading them into
the Bypass Tray.
2. Prepare a stack of paper for loading by flexing or fanning them back and
forth. Straighten the edges on a level surface.
3. Load the print material with the
print side facing down and against
the right edge of the tray.
NOTE: Hold transparencies by the
edges and avoid touching the print
side.
Bypass Tray