Filter
Top Products
PREINSTALLATION
Figure 1-9. Face-to-face shared service area space
Terminal
Requirements for the terminal follow:
• Terminal must sit within 15 ft/4.6 m of the system controller
(usually directly on it).
• Power source (wall or under flooring) for the terminal must
be within the maximum 15-ft/4.6 m length of the power
cord.
Note: To ensure the safety of service personnel during
maintenance and service, the terminal must be in the same room
as the printer and in direct line of sight with it.
Efficiency of use
There are many possible layouts for your LPS. Placement
depends on the type and amount of equipment and the size and
shape of the room used to house the equipment. Some
possible configurations for LPS components include:
• Side by side
• L-shaped
• Face to face.
Equipment placement should limit operator movements as much
as possible. Here are a few suggestions that may be helpful:
XEROX 4050/4090/4450/4650 LPS INSTALLATION PLANNING 1-15