Filter
Top Products
3. Postinstallation
After the installation of your Laser Printing System (LPS), a
number of ongoing tasks must be performed. These tasks may
include all or some of the following:
• Placing service calls for hardware problems and obtaining
assistance in solving application-related problems
• Identifying and implementing new applications
• Arranging additional operator training
• Overseeing routine customer maintenance and meter
reporting
• Ordering additional fonts and documentation
• Maintaining an adequate inventory of consumable supplies.
Reference Refer to the “Training” section of the “Preinstallation” chapter for
information on training and workshops.
As installation coordinator, it is your responsibility to designate a
person to perform these tasks.
This chapter describes these tasks and some of the Xerox
support services available to you. Use the “Consumable
supplies” table and “Supplies checklist” provided at the end of
the chapter when ordering supplies.
Xerox support services
Xerox provides many services in support of your LPS. These
services include the following:
• Xerox Printing Systems Customer Support Center
• The Xerox Connection
• Xerox Font Services
• Xerox Documentation and Software Services (XDSS)
• Xerox Supplies Order Service.
Detailed information about these services is described in this
chapter.
Prior to installation, your Xerox sales representative is available to
answer your questions about the products, services, or billing. If
you need assistance in resolving applications-related problems or
questions, contact the Xerox Customer Support Center. Your
Xerox system can provide a variefy of systems consulting
services.
XEROX 4050/4090/4450/4650 LPS INSTALLATION PLANNING 3-1