Filter
Top Products
Safety notes Installation Planning Guide
2-8 DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
Printer
USA/Canada The DocuTech/DocuPrint 75 printer requires a 115V AC outlet,
dedicated 20 Amp, 3-wire circuit. The DocuTech/DocuPrint 90
requires a 208V AC outlet, dedicated 20 Amp, 3-wire circuit.
Europe The printer requires a 220-240V outlet, dedicated 13 Amp or 10
Amp circuit. The equipment must be connected to a grounded
main outlet.
Power Connection cautions
Ensure that the power connection for your printer satisfies these
requirements:
• The power receptacle for the printer must meet the
requirements stated on the data plate on the rear of the
printer.
• The socket outlet shall be installed near the equipment within
reach of the 10 ft. (3 m) cable and shall be easily accessible.
• Use the power cable that is supplied with your printer and
controller. Do not use an extension cord, or remove or modify
the power cord plug.
• Plug the power cable directly into a correctly grounded
electrical outlet. If you are not sure whether or not an outlet is
correctly grounded, consult a qualified electrician.
•Do not use an adapter to connect the printer to an electrical
outlet that lacks a ground connection terminal.
• The power cord is the disconnect device for this printer.
•Do not override or disable electrical or mechanical interlocks.
•Do not push objects into slots or openings on the printer.
Electrical shock or fire may result.
•Do not obstruct ventilation openings. These openings
prevent overheating of the printer.
Controller
USA/Canada The controller requires a dedicated 115V AC 20 Amp grounded
receptacle for both the DocuTech/DocuPrint 75/90 and
DocuPrint 75 MX .