Filter
Top Products
Installation Planning Guide Product overview
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX 5-7
After 30 finished sets of 15 sheets, the printer:
1. cycles down
2. raises a message to empty the Stacker
3. waits until the sets are removed
4. raises the Stacker Tray
5. cycles up and resumes printing.
Staple placement
For information about the limitations of portrait and landscape
staple placement, refer to the Staple Placement section in the
Operator Guide.
Peripheral hardware components
You may have peripheral components such as an External SCSI
Hard Drive, External Tape Drive and an External Modem on a
special accessory shelf as shown in Figure 5-7.
Figure 5-7. Special accessory shelf