Installation Planning Guide Product overview
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX 5-3
Figure 5-3. Printer components
The main components of the printer are shown in Figure 5-3.
The following information sources are provided to assist you:
• Power-on/power-off indicator is on the top front of the
printer. It glows green when on and emits no light when off.
• Labels are affixed at the points of need throughout the
system. They depict information about loading the paper
stock.
• Green or Gold colored areas act as markers.
– Gold colored areas typically indicate the handle or levers
to push or pull when removing Replaceable Modules or
Cartridges.
– Green colored areas are where you clear jams.
Paper trays (trays 1-4)
The Paper Trays hold up to 500 sheets of 20 lb. (75 gsm) stock
each. You can adjust the trays to hold many sizes of paper, from
5.5 x 8.5 inches (140 x 216 mm) up to 11 x 17 inches (279 x 432
mm or A3). To handle 12 x 18 inch paper, a tray must be
specially set up. If you wish to dedicate a tray permanently to
handle this size paper please contact the Xerox Welcome
Center.
Top Tray
Stacker
Finisher
Trays 1 - 4
Tray 5 - Bypass
Tray
Tray 6 -
High
Capacity
Feeder