Xerox 75 MX Printer User Manual


 
Installation Installation Planning Guide
4-4 DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
NOTE: Xerox Europe provides its own modems and power
strip.
NOTE: In the USA & Canada only, if installing in a hallway or
exit route, allow a minimum of 44 inches (1118 mm) additional
clearance in front of the printer in order to meet the fire code
regulations.
Figures 4 through 8 in the following section are presented in the
order of preferred placement. The dimensions assume a
movable installation (carpet no deeper than 0.25 inches or 7
mm). Additional access measurements are shown in Table 4-2.
The symbols used in the space requirements figures are defined
in Figure 4-4.
Figure 4-4. Symbols used in figures
Always attempt to place the equipment in the standard location
before selecting any other location.
Standard equipment location - space requirements
The preferred location of the equipment is called the standard
location, shown in Figure 4-5. The standard location requires:
CPU on floor, between the printer and the wall
Monitor, controller modem, keyboard and mouse on top of
the printer
CPU
Peripherals
Peripherals
Table
Printer