Filter
Top Products
6 Maintenance
8265/8290/8365/8390 User Guide 107
6.2.1.2 Cleaning around the bottom of heads
Step 1 : Open the left maintenance covers by removing the four screws.
Step 2 : Power ON the printer.
Step 3 : Go to the H.Unlock Menu and press the F2 key to unlock the carriage.
Step 4 : Open the Front Cover.
Step 5 : Slide the carriage into the left maintenance area.
Step 6 : Clean the edges of the heads with a cleaning swab wetted by Eco-solvent Cleaning Liquid.
Make sure you do not touch, clean the nozzle plate; this would lead to poorer print quality.
Caution
• Make sure not to touch the nozzle plate. This could lead to poorer print quality.
• It is recommended to wear gloves (2) as shown on the picture below.
1 Cleaning Swabs
2 Gloves