Filter
Top Products
4 Printer Operation
8265/8290/8365/8390 User Guide 71
4.3.4.9 CapCycle Menu
Perform a TubingFlush every 1 to 24 hours.
Notes
A TubingFlush is automatically performed after 10 minutes of idle and before shut down of the printer.
Setup items Parameters Description
OFF No tubing flush will be performed CapCycle
1 – 6 - 24 hours Every 1 – 24 hours (adjustable) a TubingFlush is performed.
- • [CANCEL] key: To shift to the previous hierarchy menu.
4.3.4.10 SlantCh.
Menu
To enable or disable whether the printer performs a slant check after every print of at least 1 meter.
Setup items Parameters Description
Off No SlantCheck SlantCh.
On Perform SlantCheck
- • [CANCEL] key: To shift to the previous hierarchy menu.
4.3.4.11 RemPanel
Menu
Enables or disables using Remote Panel software.
Setup items Parameters Description
Off Remote panel usage is disabled. RemPanel.
On Remote panel usage is enabled.
- • [CANCEL] key: To shift to the previous hierarchy menu.
*RemPanel*
Off On
-On- (1/1)