Filter
Top Products
2-1
2 PRODUCT OVERVIEW
2.1 PART NAMES AND FUNCTIONS
2.1.1 Front / Winder
(*)
No Name Function
1
Front tensioning system Adjust the tension between the print platform and the winding system.
2
Operation panel To control the unwinder winder 100 manually or automatically
3
PCB Box Contains the boards to control the UW/W 100.
4
Motorized roll unit Supports and winds up the roll media.
5
Roll unit bar Supports the roll units.
6
Roll unit Supports the roll media.
2.1.2 Rear / Unwinder
(*)
No Name Function
1
Rear tensioning system Adjust the tension between the print platform and the unwinding system.
2
Roll unit Supports the roll media.
3
Motorized roll unit Supports and unwinds the roll media.
4
Roll unit bar Supports the roll units.
*
On the picture above, the winding system is installed on a Spitfire 65. The position of some parts shall be different when installing the
winding system on a Spitfire 90”, Rockhopper 3, Viper or a ValueJet 1604.