Filter
Top Products
XES Synergix 8825/8830/8850/8855 Windows NT 4.0 PostScript Print Driver User Guide 7
Driver Configuration (Printer Properties Dialog)
Printer Properties Dialog Tabs
The following is a list of the Tabs of the Printer Properties Dialog containing
numerous printer parameters that can be set as the print processing defaults
for ALL print jobs by left mouse clicking on the appropriate tab and making
the available selections.
• General Tab – Click “Print Test Page” to print a test page. Other buttons
are not supported at this time.
• Ports Tab – Allows you to add and delete ports and select (with a check
mark) the currently active port for the displayed printer. You MUST have
an active port created and selected for use with the PostScript
printer or you will not be able to print.
• Scheduling Tab – Allows you to set the availability of the printer on a 24
hour basis; to set the priority of document printing (with higher priorities
taking precedence in queues); and to set spooler options so that print
jobs are spooled (directed) to RAM or your hard drive for background
printing, freeing up your desktop application(s) in the process.
• Sharing Tab – Allows you to set up the printer as a shared network
printer in a peer-to-peer network environment.
• Security Tab – Allows you to set up printer administrator permissions,
printer auditing information, and printer ownership information in a peer-
to-peer network environment.
• Device Settings Tab – The most user-oriented, feature-laden Tab of this
dialog, allowing the setting up of the driver with installed media roll sizes,
and the configuration of the font substitution table for substituting printer-
resident fonts for TrueType fonts when such substitution is activated
(selected from the Advanced Tab of the Document Properties dialog).
Figure 2. Typical Printer Properties Dialog