Filter
Top Products
XES Synergix 8825/8830/8850/8855 Windows NT 4.0 PostScript Print Driver User Guide 3
Before You Start
Printing a PRINTER CONFIGURATION
Test Print
To check the communication settings of the printer, print a PRINTER
CONFIGURATION Test Print as follows:
• While the Printer is NOT printing, from the Web PMT, accessed through
a web browser installed on your workstation, select PRINTER
DEFAULTS, TEST PRINT.
• Select the Minimal button to get a Configuration test print.
• Select the Back arrow to return to the Test Print choices screen.
• You can now exit the Web PMT by closing your web browser.
Notes:
You can also print a test print from the UTILITIES menu of the
8825/8830/8850 Printer Control Panel, as explained in the XES Synergix
8825/8830/8850/8855 System Introduction for Firmware 7.0.
Note that the POSTSCRIPT LICENSE must be PRESENT in order to
print with this driver.
Figure 1. Typical Printer
Configuration Test Print