Filter
Top Products
XES Synergix 8825/8830/8850/8855 Windows NT 4.0 PostScript Print Driver User Guide 11
Driver Configuration (Document Properties Dialog)
Document Properties Dialog Tabs
This dialog consists of three Tabs: the Page Setup Tab, the Advanced Tab
and the Job Tab. Select a Tab, change any parameters to the settings
desired, then click the OK button for your changes to take effect and to return
you to the application Print screen.
Advanced Tab Parameters
PAPER/OUTPUT PARAMETERS
Paper Size
This parameter displays the currently-selected paper size. To change the
paper size to match your application’s page layout, left mouse click on
Paper Size and make a selection from the available list in the bottom
dialog box. The default paper size is Letter.
PostScript Custom Page Size - If you click on this selection from
the list of available paper size settings, you can create Custom Page
Size dimensions and modify the position of your printed page relative
to the edge of the roll or sheet of media. Note that with roll fed media
the paper feed direction is not applicable.
Figure 4. Typical Document Properties Dialog