Xerox 8850 Copier User Manual


 
30 Getting to know the WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEM
Powering the Xerox 6204 Wide
Format Solution On/Off
The following describes the procedure for powering the Xerox 6204 Wide
Format Solution with FreeFlow Accxes Print Server on and off.
1. Move the printer circuit breaker switch up, to the On [
| ] position.
2. Move the printer power switch to the On [
| ] position.
3. Press the power button on the front of the controller.
The power button lamp will illuminate. After about one-half minute,
the control panel will display the message Printer Warming Up. The
machine will be print-ready in about three minutes.
CAUTION Powering down the system incorrectly may result in data
corruption and a service call. The system shutdown procedure below
allows the controller to power down correctly. Shutdown is best
performed through the Web Print Management Tool or the control
panel’s System Administration menu’s [Shutdown] feature. Only
authorized persons should power down the system fully.
1. Ensure that all jobs have finished processing, and that the
<Transmitting> indicator on the control panel is not illuminated.
2. Select [Shutdown] from either the control panel or the Web Print
Management Tool.
From the control panel
Select the <Log In/Out> button, enter the System Administration
password, and then select the [Shutdown] button.
Powering On the
System
Powering Off the
System
Power Button
Circuit Breaker
Printer Power
Switch