Filter
Top Products
FDL-GENERATED MESSAGES
B-2 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE
FD2740 FSL NOT FOUND OR INVALID OPTION. CHECK
AND RETRY.
The specified forms source library (FSL) file does not
exist on the system disk or the option is invalid.
Compiler aborts.
1. Check for correct file name.
2. Create FSL file on disk if necessary. (Refer to
the “Editor” chapter in your
DocuPrint 96/
DocuPrint 96MX LPS Operations Reference.
3. Retry FDL task.
FD2915 SECURITY VIOLATION.
Requested file has been protected by ABNORMAL
SECURITY = YES command. Attempt was made to
access it at wrong logon level. To access file, obtain
correct password and log on at Level 5. (Refer to
your
DocuPrint 96/DocuPrint 96MX LPS Operations
Reference.)
FD4500 ERROR IN READING MAGNETIC TAPE.
System is unable to read input tape containing FDL.
Compiler aborts.
1. Clean tape drive. (Refer to the “Maintenance”
chapter in your
DocuPrint 96/DocuPrint 96MX
LPS Operator Guide
.)
2. If problem recurs, remake FDL tape.
FD8500 STACK UNDERFLOW.
Forms compiler software error has occurred.
Compiler will abort
1. Retry compiling
2. If message reappears, call your system support
representative.
FD9400-
FD9540
Disk/file error messages
System is unable to access (read, write, open, or
close) indicated file due to problem with disk. Forms
compiler will abort.
1. Retry entry. Message should not reappear if
failure was intermittent memory error.
2. If problem persists, call your system support
representative.
FD9400
ERROR IN CLOSING THE SOURCE-INPUT FILE
FD9410
ERROR IN CLOSING THE SOURCE-OUTPUT FILE
FD9420
ERROR IN CLOSING THE LISTING/SUMMARY FILE
FD9430
ERROR IN OPENING THE SOURCE/OUTPUT FILE
FD9440
ERROR IN OPENING THE LISTING/SUMMARY FILE
FD9450
ERROR IN READING THE SOURCE-INPUT FILE
FD9460
ERROR IN READING THE SOURCE-OUTPUT FILE
FD9470
ERROR IN READING THE SOURCE-OUTPUT FILE
FD9475
ERROR IN BACK-SPACING THE SOURCE-OUTPUT FILE