Filter
Top Products
FORMS DESCRIPTION LANGUAGE
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 3-7
Using B4 paper size
When B4 size paper is specified in centimeters, the value should be
rounded off to 25.71 CM. This is only necessary when your GRID
statement is GRID [UNIT] [IS] INCHES.
When no paper size is specified When there is no PAPER [SIZE] command specified in the FSL, the
DocuPrint 96/DocuPrint 96MX uses the sysgened paper size as the
default. The sysgen process does not check for the minimum nor the
maximum paper size. Therefore, if you sysgen the DocuPrint 96/
DocuPrint 96MX with less than the minimum or greater than the
maximum paper size than its IOT can support, the DocuPrint 96/
DocuPrint 96MX compares the sysgened paper size to the IOT-
supported minimum/maximum paper size and if the sysgened paper
size is out of the IOT-supported minimum/maximum paper size
range, the following error message appears:
Sysgened paper size is out of range
Loading unsupported paper sizes If an FRM file specifies a paper size that is not supported by the IOT,
the DocuPrint 96/DocuPrint 96MX aborts the job before any printing
takes place and displays the following error message:
Invalid paper size