Filter
Top Products
FORMS DESCRIPTION LANGUAGE
3-24 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE
Example:
AT 4,6 BOX 24 BY 4 USI SHA HEA;
This example creates a shaded box:
BOX command defaults The default for LINES is SOLID 1. The default for REPEAT is
HORIZONTALLY.
0 lines Specifying a line thickness of 0 is useful for positioning text in an
invisible box. When using this technique, however, remember that 0
lines, although they are not printed, appear as lines internally.
Note: A single BOX command can specify either an outlined box or
a shaded box, but not both. That combination requires a second BOX
command.
Example 1 AT 4, 6 BOX 14 WIDE BY 4 HIGH;
This command specifies a box 14 grid units wide and four grid units
high, with the upper left corner four grid units down from the form
origin and six grid units to the right of the form origin, as shown in
figure 3-12.
Figure 3-12. Drawing a box